|
|
Tube Flaring Technology under Dynamic Conditions
Macháček, David ; Forejt, Milan (referee) ; Peterková, Eva (advisor)
This master thesis is divided into three main parts. In first part is more closely described the method of tube flaring. Tube flaring was chosen for analysis of biaxial stress, in this thesis particularly in the presence of high strain rate. In the second part is more closely described influence of high strain rate on the forming process. There is described influence of high strain rate on behavior of the material, hardening, change of quasi-static yield strength to the dynamic yield strength, influence of high strain rate on the microstructure and more. During the description of these processes there is effort to describe the cause of these changes as well. For this task was used domestic and foreign literature, as well as peer review papers whose authors study intensively this problematic. Besides all of the above there is also derived the velocity of elastic and plastic wave. In the end is evaluated experiment, in which was done tube flaring, which is part of this master thesis. Results from the 3D optical system ARAMIS are interpreted with the help of Microsoft Excel, where the chosen results were used as the input to the equations modified for the dynamic loading.
|
|
|
Technology expanding pipes into tube sheet
Podstata, Jan ; Císařová, Michaela (referee) ; Štroner, Marek (advisor)
The project developed within the Bachelor's degree program in Engineering Technology presents literary research in the field of tubing expanding in the tubing. There have been known several possibilities how to roll the tube from the history as well as new modern ways. The work includes an analysis of the types of joints and their characteristics. The openings in the tube and the ends on the tube must be adjusted and of particular tolerance. There are also several types of tools that can be used to roll the tube. The tool is chosen according to the type and the position of the joint.
|
|
|
Flaring the End of a Tube Under Static and Dynamic Conditions
Šrefl, Martin ; Samek, Radko (referee) ; Peterková, Eva (advisor)
The thesis is focused on expanding the ends of the tubes made of 1.4031 material into a cone shape for quasi-static and dynamic conditions. The aim of the research is the analysis of stress-strain condition in the area formed under the process conditions. As a technology test for expanding tubes is used a method of pushing the tube at a stationary mandrel and deformation measurement was done by 3D optical system ARAMIS. In the thesis is described in detail an experiment carried out under quasi-static conditions, the results of which yielded interesting findings. In the framework of the present study were designed and detailed engineering design and production tools designed for experimental realization of technological tests for quasi-static and dynamic conditions. Exploration in terms of the behavior of tube under dynamic conditions forming in this thesis is carried out in phase functional verification tools. The analysis of the forming process is planned in the framework of the next thesis.
|
|
|
Tool design for pressing of the tarp grommets
Hudeček, Marek ; Císařová, Michaela (referee) ; Řiháček, Jan (advisor)
The thesis solves the design of tools for pressing round eyelet 10 mm diameter from steel sheet of DX51 0,5 mm thick. The ring is produced on the press LENA 25 C. Based on a literary study of shearing, expanding and neck drawing, a tool was developed that combines the hole punching of the sail and expanding of the ring end. The study of the circle edge appearance on SSM 3-E stereo microscope and the measurement of wall thickness using the ATOS Core 80 was performed. A simulation of the strain on the press was performed. The proposed tool was experimentally verified as working.
|
|
|
Tool design for pressing of the tarp grommets
Hudeček, Marek ; Císařová, Michaela (referee) ; Řiháček, Jan (advisor)
The thesis solves the design of tools for pressing round eyelet 10 mm diameter from steel sheet of DX51 0,5 mm thick. The ring is produced on the press LENA 25 C. Based on a literary study of shearing, expanding and neck drawing, a tool was developed that combines the hole punching of the sail and expanding of the ring end. The study of the circle edge appearance on SSM 3-E stereo microscope and the measurement of wall thickness using the ATOS Core 80 was performed. A simulation of the strain on the press was performed. The proposed tool was experimentally verified as working.
|
|
|
Tube Flaring Technology under Dynamic Conditions
Macháček, David ; Forejt, Milan (referee) ; Peterková, Eva (advisor)
This master thesis is divided into three main parts. In first part is more closely described the method of tube flaring. Tube flaring was chosen for analysis of biaxial stress, in this thesis particularly in the presence of high strain rate. In the second part is more closely described influence of high strain rate on the forming process. There is described influence of high strain rate on behavior of the material, hardening, change of quasi-static yield strength to the dynamic yield strength, influence of high strain rate on the microstructure and more. During the description of these processes there is effort to describe the cause of these changes as well. For this task was used domestic and foreign literature, as well as peer review papers whose authors study intensively this problematic. Besides all of the above there is also derived the velocity of elastic and plastic wave. In the end is evaluated experiment, in which was done tube flaring, which is part of this master thesis. Results from the 3D optical system ARAMIS are interpreted with the help of Microsoft Excel, where the chosen results were used as the input to the equations modified for the dynamic loading.
|
|
|
Technology expanding pipes into tube sheet
Podstata, Jan ; Císařová, Michaela (referee) ; Štroner, Marek (advisor)
The project developed within the Bachelor's degree program in Engineering Technology presents literary research in the field of tubing expanding in the tubing. There have been known several possibilities how to roll the tube from the history as well as new modern ways. The work includes an analysis of the types of joints and their characteristics. The openings in the tube and the ends on the tube must be adjusted and of particular tolerance. There are also several types of tools that can be used to roll the tube. The tool is chosen according to the type and the position of the joint.
|
|
|
Flaring the End of a Tube Under Static and Dynamic Conditions
Šrefl, Martin ; Samek, Radko (referee) ; Peterková, Eva (advisor)
The thesis is focused on expanding the ends of the tubes made of 1.4031 material into a cone shape for quasi-static and dynamic conditions. The aim of the research is the analysis of stress-strain condition in the area formed under the process conditions. As a technology test for expanding tubes is used a method of pushing the tube at a stationary mandrel and deformation measurement was done by 3D optical system ARAMIS. In the thesis is described in detail an experiment carried out under quasi-static conditions, the results of which yielded interesting findings. In the framework of the present study were designed and detailed engineering design and production tools designed for experimental realization of technological tests for quasi-static and dynamic conditions. Exploration in terms of the behavior of tube under dynamic conditions forming in this thesis is carried out in phase functional verification tools. The analysis of the forming process is planned in the framework of the next thesis.
|
guest ::
